Skip to content
(800) 290-5816
Concrete Lab

Concrete Cure Clock

Strength by the day for the temperature you will pour in, with days to reach the strength you need..

Concrete Cure Clock from Commercial Crete
The tool

Use the Concrete Cure Clock

0
Days to your target
0
Safe from freezing (500 psi)
0
Forms off, loads on (70%)
0
Full design strength
0

Strength follows the ACI 209 curve and temperature enters as equivalent age (Nurse-Saul maturity, datum 14 F). It assumes moist curing and ordinary cement. Cylinder breaks and the engineer decide when to strip or load.

How it works

About the Concrete Cure Clock

Set the average temperature, the design strength and the age, and the clock shows the strength now, the days to reach your target and the days to the safe-from-freezing, forms-off and full-strength milestones.

What does the clock calculate?

Strength gain follows a standard curve, and temperature changes the pace through equivalent age, so a week at 40 degrees counts for less than a week at 70. It is an estimate for planning, and cylinders and the engineer decide when to load.

Why does cold weather slow everything?

Cement reacts more slowly when it is cold, so strength gain slows. Below about 14 degrees Fahrenheit the reaction effectively stops, which is why concrete must be protected from freezing.

Is 70 percent really safe for loads?

It is a common benchmark for stripping forms and early loading, but the project specification governs and may set a different number.

Next step

Want a person to check the numbers?

Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.

Get a free bid(800) 290-5816

Free bid

Tell us what you are pouring

Send the city, the kind of concrete work and when you need it. You get a plain written bid with quantities, scope and schedule, and a person answers the phone at (800) 290-5816.

  • The city or address, and the kind of work: a slab, a floor, a dock, a lot, a repair, a coating
  • The rough size and thickness if you know them, and any drawings you can send
  • Your schedule: start date, hours the building is open and anything that cannot be shut down
(800) 290-5816

Get a free bid

We only use your details to answer your request and prepare your bid.