Dumpster Pads and Enclosures for commercial projects
A dumpster takes point loads from the container and the haul truck, and spills fluids onto the slab. We pour thick, reinforced pads and build enclosures with gates and bollards.

Typical dumpster Pads and Enclosures jobs
- Dumpster and compactor pads
- Pads with a washdown slope and drain connection
- Block, precast or concrete enclosure walls
- Grease-bin and recycling enclosures
The numbers
- Pad thickness6 to 8 in with reinforcing
- SizeExtended to carry the truck's front axle
- SlopeAbout 1 to 2 percent to a drain
The dumpster Pads and Enclosures process, step by step
- 1
Subgrade compacted and the pad sized to the container and truck path
- 2
Reinforced slab with a slight slope to a drain placed
- 3
Enclosure footings and walls built and gates set
- 4
Bollards, curb and sealed surface finished for cleaning
Dumpster Pads and Enclosures in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Floors, Docks and FlatworkWarehouse and Industrial FloorsFlat, tough floors for forklifts, racks and constant traffic
Floors, Docks and FlatworkDistribution Center FloorsGiant floors placed fast with laser screeds
Floors, Docks and FlatworkCold Storage FloorsFloors that stay solid in freezers and coolers
Floors, Docks and FlatworkPolished ConcreteA hard, glossy floor made from the slab itself
Floors, Docks and FlatworkFloor Grinding and LevelingFlat floors from ones that are not
Floors, Docks and FlatworkLoading Docks and ApronsDock pads that take the beating of trucks and trailersNo service matches that search. Try a shorter word.
Dumpster Pads and Enclosures: straight answers
Why are dumpster pads thick?
The haul truck's front axle and a loaded container concentrate weight on a small area, so thin slabs crack and rut quickly.
Does a dumpster pad need a drain?
Many codes require a pad to drain to a sanitary sewer or an approved treatment, since grease and fluids cannot go to the storm system.
Why are there joints in my slab?
Concrete shrinks as it dries, so it cracks. Joints are planned lines where it can crack neatly, and sawing them early keeps cracks out of the middle of the panels.
Do you do dumpster Pads and Enclosures in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for dumpster Pads and Enclosures
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.