ADA Ramps and Curb Cuts for commercial projects
Accessible ramps and curb cuts have to meet exact slopes, widths and landings. We lay them out against the code, set the detectable warnings and check slopes with a digital level before the concrete sets.

Typical aDA Ramps and Curb Cuts jobs
- Curb ramps at crosswalks and entrances
- Building ramps with landings and handrail sleeves
- Accessible parking stalls and loading zones
- Detectable warning surfaces
The numbers
- Ramp slopeNo steeper than 1 in 12 (8.33 percent)
- LandingsAt least 5 ft square at the top and turns
- Detectable warningTruncated domes in a contrasting color
The aDA Ramps and Curb Cuts process, step by step
- 1
Existing grades surveyed against the accessibility requirements
- 2
Forms set to slope, landings sized and detectable warnings laid out
- 3
Concrete placed and finished, slopes checked with a digital level
- 4
Surface broomed, warnings set and the route cured and protected
ADA Ramps and Curb Cuts in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Floors, Docks and FlatworkWarehouse and Industrial FloorsFlat, tough floors for forklifts, racks and constant traffic
Floors, Docks and FlatworkDistribution Center FloorsGiant floors placed fast with laser screeds
Floors, Docks and FlatworkCold Storage FloorsFloors that stay solid in freezers and coolers
Floors, Docks and FlatworkPolished ConcreteA hard, glossy floor made from the slab itself
Floors, Docks and FlatworkFloor Grinding and LevelingFlat floors from ones that are not
Floors, Docks and FlatworkLoading Docks and ApronsDock pads that take the beating of trucks and trailersNo service matches that search. Try a shorter word.
ADA Ramps and Curb Cuts: straight answers
What is the maximum ramp slope?
A ramp run can be at most 1:12, which is one inch of rise for every foot of run, with level landings at the top, bottom and at turns.
Who checks the slopes?
Our crew checks them as we pour, and your inspector or accessibility specialist checks them again before sign-off.
How flat does a floor need to be?
It depends on the traffic. Standard retail floors tolerate a little roll, while narrow-aisle forklifts and automated vehicles need very flat, level floors, measured with FF and FL numbers.
Do you do aDA Ramps and Curb Cuts in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for aDA Ramps and Curb Cuts
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.