Core Drilling for commercial projects
Core drills cut precise round holes for pipes, conduit, anchors and tests. They cut through rebar and thick concrete with little vibration and no breakage around the hole.

Typical core Drilling jobs
- Plumbing, electrical and HVAC penetrations
- Anchor and dowel holes
- Concrete strength samples for testing
- Holes from half an inch to several feet in diameter
The numbers
- Bit size1/2 in to 60 in diameter
- Scan firstRadar or X-ray before drilling post-tensioned slabs
- Cores for testingTaken per the standard for strength tests
The core Drilling process, step by step
- 1
Locations scanned with radar or a rebar locator to avoid cables and steel
- 2
Drill rig anchored and the bit started with water
- 3
Core drilled through and removed
- 4
Hole cleaned, sleeved or patched, firestopped as required
Core Drilling in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Cutting, Demolition and SpecialtyConcrete DemolitionOld concrete broken out, hauled off and recycled
Cutting, Demolition and SpecialtyConcrete Sawing and CuttingClean straight cuts in slabs, walls and pavement
Cutting, Demolition and SpecialtyWall Sawing and Slab RemovalOpenings and slabs cut out in controlled pieces
Cutting, Demolition and SpecialtyHydrodemolitionConcrete removed with water, steel left undamaged
Cutting, Demolition and SpecialtyConcrete Pumping and PlacementConcrete delivered exactly where you need it
Cutting, Demolition and SpecialtyCold Weather ConcreteWinter pours that still reach full strengthNo service matches that search. Try a shorter word.
Core Drilling: straight answers
Why scan before drilling?
Rebar, conduit and especially post-tension cables are hidden in concrete. Scanning finds them so we do not cut something that holds the building up.
Can a core be used to test concrete strength?
Yes. Cores taken from a slab are cut, capped and crushed in a lab to measure the in-place strength.
How do weather and curing change a pour?
Heat and cold change how fast concrete sets and gains strength. A weather plan sets mix, protection and timing so the slab reaches its strength safely.
Do you do core Drilling in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for core Drilling
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.