Floor Grinding and Leveling for commercial projects
Old floors get high spots, low spots, coatings and glue. Grinding takes down the high and clears the surface, and self-leveling underlayment fills the low, so new flooring or coatings go on a flat base.

Typical floor Grinding and Leveling jobs
- Preparing slabs for tile, carpet, vinyl and resilient flooring
- Removing old coatings, adhesives and paint
- Flattening slabs for sensitive equipment
- Self-leveling overlays up to a few inches thick
The numbers
- UnderlaymentFrom a feather edge up to about 2 in or more per pour
- Flatness goalOften 1/8 in in 10 ft for flooring
- Dust controlHEPA vacuum on every grinder
The floor Grinding and Leveling process, step by step
- 1
Floor scanned with a straightedge or laser and a plan marked
- 2
High spots ground and coatings removed with dust collection
- 3
Primer applied and self-leveling underlayment poured and spread
- 4
Cured, tested for flatness and bond and handed to the next trade
Floor Grinding and Leveling in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Floors, Docks and FlatworkWarehouse and Industrial FloorsFlat, tough floors for forklifts, racks and constant traffic
Floors, Docks and FlatworkDistribution Center FloorsGiant floors placed fast with laser screeds
Floors, Docks and FlatworkCold Storage FloorsFloors that stay solid in freezers and coolers
Floors, Docks and FlatworkPolished ConcreteA hard, glossy floor made from the slab itself
Floors, Docks and FlatworkLoading Docks and ApronsDock pads that take the beating of trucks and trailers
Floors, Docks and FlatworkConcrete Parking LotsLong-lasting lots that stay flatNo service matches that search. Try a shorter word.
Floor Grinding and Leveling: straight answers
When do I grind, and when do I level?
Grind where the slab is high or coated, level where it is low. Most floors need some of both.
How soon can flooring go on a leveler?
Many products accept flooring after a day, but moisture testing comes first, since trapped moisture is what ruins floors.
How flat does a floor need to be?
It depends on the traffic. Standard retail floors tolerate a little roll, while narrow-aisle forklifts and automated vehicles need very flat, level floors, measured with FF and FL numbers.
Do you do floor Grinding and Leveling in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for floor Grinding and Leveling
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.