Shotcrete and Gunite for commercial projects
Shotcrete is concrete or mortar sprayed through a hose onto a surface. It builds walls, shores slopes, lines tunnels and repairs structures without forms.

Typical shotcrete and Gunite jobs
- Soil-nail and slope stabilization walls
- Retaining and basement walls built against excavations
- Repairs on walls, tanks and bridge piers
- Pools, tanks and architectural shells
The numbers
- ProcessWet-mix or dry-mix, applied pneumatically
- Typical strength4,000 to 5,000 psi or more
- ThicknessBuilt in layers of a few inches at a time
The shotcrete and Gunite process, step by step
- 1
Surface prepared and rebar or mesh fixed with the right cover
- 2
Nozzle operator sprays in layers, starting from the bottom up
- 3
Surface screeded and finished or left as sprayed
- 4
Cured with water or a membrane to keep it from drying out
Shotcrete and Gunite in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Structure and FoundationsFoundation Walls and FootingsFootings and walls that carry the whole building
Structure and FoundationsDrilled Piers and CaissonsDeep shafts that carry loads to rock or firm soil
Structure and FoundationsSlab on GradeThe floor slab that everything else sits on
Structure and FoundationsElevated Slabs and DecksStructural floors poured above ground
Structure and FoundationsConcrete Columns and BeamsCast-in-place frames that stand up to the load
Structure and FoundationsShear Walls and Core WallsWalls that brace tall buildings against wind and quakesNo service matches that search. Try a shorter word.
Shotcrete and Gunite: straight answers
When is shotcrete better than forming and pouring?
On slopes, curved shapes and repairs where forms would be slow or impossible. It also works well against an excavation wall, with no forms to set.
What is the difference between shotcrete and gunite?
Gunite usually means the dry-mix process, shotcrete is the broader term. Both place concrete by spraying, and the right method depends on the job.
How do you keep structural pours on schedule?
A written pour plan covers truck spacing, pump placement, crew size, testing and a backup for rain or a breakdown, and the plan is agreed with the general contractor before the day.
Do you do shotcrete and Gunite in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for shotcrete and Gunite
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.