Precast Concrete Erection for commercial projects
Precast pieces are cast in a plant under controlled conditions and delivered ready to set. We handle the foundations, the crane picks, the connections and the grout so the pieces go up fast and fit.

Typical precast Concrete Erection jobs
- Double-tees, hollow-core planks and beams in parking and office structures
- Architectural precast wall panels and spandrels
- Precast stairs, landings and retaining units
- Precast screen walls, vaults and tanks
The numbers
- Hollow-core plank8 to 12 in deep, spans up to about 40 ft
- Plant concreteOften 5,000 to 7,000 psi
- Erection toleranceOften within 1/4 to 1/2 in
The precast Concrete Erection process, step by step
- 1
Foundations and bearing surfaces poured to tight tolerances
- 2
Crane, rigging and pick plan reviewed before delivery day
- 3
Pieces set, aligned, welded or bolted and braced
- 4
Joints grouted and caulked, then the whole assembly cleaned and sealed
Precast Concrete Erection in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Structure and FoundationsFoundation Walls and FootingsFootings and walls that carry the whole building
Structure and FoundationsDrilled Piers and CaissonsDeep shafts that carry loads to rock or firm soil
Structure and FoundationsSlab on GradeThe floor slab that everything else sits on
Structure and FoundationsElevated Slabs and DecksStructural floors poured above ground
Structure and FoundationsConcrete Columns and BeamsCast-in-place frames that stand up to the load
Structure and FoundationsShear Walls and Core WallsWalls that brace tall buildings against wind and quakesNo service matches that search. Try a shorter word.
Precast Concrete Erection: straight answers
Why use precast?
It is made in a plant with controlled curing, so quality is consistent, and it goes up in days rather than weeks, which shortens the schedule.
What decides whether precast or cast-in-place is cheaper?
Repetition. A building with many identical pieces, such as parking decks, favors precast. One-off shapes and tight sites often favor cast-in-place.
Who designs the structural concrete?
The project's structural engineer designs the sizes, steel and strength. We build to those drawings, and we point out buildability issues early so changes are made on paper, not in the field.
Do you do precast Concrete Erection in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for precast Concrete Erection
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.