Polished Concrete for commercial projects
Polished concrete is the slab ground in steps with diamond tooling, densified and burnished to a sheen. It is hard, easy to clean, reflective and has no coating to peel.

Typical polished Concrete jobs
- Retail, showroom and restaurant floors
- Office lobbies and open workspaces
- Warehouses and car dealerships
- Schools, labs and healthcare corridors
The numbers
- Grit stepsFrom about 50 up to 800, 1,500 or 3,000
- DensifierLithium or sodium silicate, soaked in
- Finish levelsMatte, satin or high gloss, with the aggregate exposed to match
The polished Concrete process, step by step
- 1
Slab inspected and repaired, then ground with coarse metal diamonds
- 2
Densifier applied to harden the surface
- 3
Refined with finer resin diamonds through the grits
- 4
Guard applied and burnished to the specified gloss
Polished Concrete in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Floors, Docks and FlatworkWarehouse and Industrial FloorsFlat, tough floors for forklifts, racks and constant traffic
Floors, Docks and FlatworkDistribution Center FloorsGiant floors placed fast with laser screeds
Floors, Docks and FlatworkCold Storage FloorsFloors that stay solid in freezers and coolers
Floors, Docks and FlatworkFloor Grinding and LevelingFlat floors from ones that are not
Floors, Docks and FlatworkLoading Docks and ApronsDock pads that take the beating of trucks and trailers
Floors, Docks and FlatworkConcrete Parking LotsLong-lasting lots that stay flatNo service matches that search. Try a shorter word.
Polished Concrete: straight answers
Does polished concrete need a coating?
No. The surface is densified and burnished, though a guard or periodic maintenance polish keeps stains out and the sheen up.
Is a polished floor slippery?
A dry, properly finished floor has good traction, and a lower gloss or a slip-resistant guard can improve it where spills are likely.
How flat does a floor need to be?
It depends on the traffic. Standard retail floors tolerate a little roll, while narrow-aisle forklifts and automated vehicles need very flat, level floors, measured with FF and FL numbers.
Do you do polished Concrete in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for polished Concrete
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.