Concrete Mix Chooser
The strength, water ratio, slump and air content for twelve common jobs and four weather exposures..

Use the Concrete Mix Chooser
- Water-cement ratio
- 0
- Slump
- 0
- Air content
- 0
- Rules that set it
- 0
Typical values from common practice and the ACI 318 exposure classes. The project engineer's specification always governs.
Saved. They will go with your request when you send the form.
About the Concrete Mix Chooser
Pick what you are pouring and how the concrete will be exposed to freezing, and the chooser returns the minimum strength, the maximum water-cement ratio, the slump range and the air content, using the stricter of the job and the exposure.
What are exposure classes?
ACI 318 groups freezing conditions into classes: F1 for freezing with limited moisture, F2 for freezing in moist conditions and F3 for freezing with de-icing salts. Each sets a lowest strength, a highest water ratio and an air content.
Why does water ratio matter so much?
The more water compared with cement, the more pores the concrete has when it dries, and the weaker and less durable it is. Keeping the ratio low is the cheapest durability there is.
Can the contractor add water at the truck?
Not without the engineer's approval. Water raises the water ratio and cuts strength. Plasticizers add workability without it.
Services that go with it
Structure and FoundationsTilt-Up Concrete WallsWall panels cast flat and lifted into place
Floors, Docks and FlatworkCold Storage FloorsFloors that stay solid in freezers and coolers
Floors, Docks and FlatworkConcrete Parking LotsLong-lasting lots that stay flat
Cutting, Demolition and SpecialtyConcrete Testing and InspectionProof that the concrete in the form is what you orderedNo service matches that search. Try a shorter word.
Want a person to check the numbers?
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.