Concrete Testing and Inspection for commercial projects
Slump, air, temperature and cylinder breaks show whether the concrete meets the spec. We coordinate sampling and testing with independent labs and keep records for the owner and the engineer.

Typical concrete Testing and Inspection jobs
- Slump, air and temperature tests at the truck
- Cylinder casting and curing for 7 and 28 day breaks
- Core samples and in-place strength checks
- Batch ticket review and pour records
The numbers
- SlumpMeasured with a cone, ASTM C143
- Air contentPressure meter, ASTM C231
- Strength6 by 12 or 4 by 8 in cylinders crushed, ASTM C39
The concrete Testing and Inspection process, step by step
- 1
Testing plan agreed with the engineer and lab before the pour
- 2
Samples taken from the truck at the chute and tested on the spot
- 3
Cylinders cured and sent to the lab to be broken at 7 and 28 days
- 4
Results reviewed, and any low break triggers a plan
Concrete Testing and Inspection in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Cutting, Demolition and SpecialtyConcrete DemolitionOld concrete broken out, hauled off and recycled
Cutting, Demolition and SpecialtyConcrete Sawing and CuttingClean straight cuts in slabs, walls and pavement
Cutting, Demolition and SpecialtyCore DrillingRound, clean holes through slabs and walls
Cutting, Demolition and SpecialtyWall Sawing and Slab RemovalOpenings and slabs cut out in controlled pieces
Cutting, Demolition and SpecialtyHydrodemolitionConcrete removed with water, steel left undamaged
Cutting, Demolition and SpecialtyConcrete Pumping and PlacementConcrete delivered exactly where you need itNo service matches that search. Try a shorter word.
Concrete Testing and Inspection: straight answers
What if a cylinder breaks low?
One low break does not mean the slab is bad. The engineer reviews other breaks, the curing and in-place tests like cores or rebound hammer before deciding.
Why break cylinders at 7 and 28 days?
The 7-day break shows the strength is on track, and the 28-day break is the standard for acceptance.
Is cutting and coring safe for the structure?
Yes, when it is planned. We scan for rebar, utilities and post-tension cables first and have the engineer review openings in structural members.
Do you do concrete Testing and Inspection in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for concrete Testing and Inspection
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.