Skip to content
(800) 290-5816
Cutting, Demolition and Specialty

Concrete Pumping and Placement for commercial projects

Pumps move concrete over buildings, around obstacles and up many stories. Boom, line and mini pumps get the mix where trucks cannot go, with a steady flow for the finishers.

Concrete Pumping and Placement work by Commercial Crete
What it covers

Typical concrete Pumping and Placement jobs

  • Boom pumps on decks, walls and foundations
  • Line pumps for slabs, basements and tight sites
  • High-rise placement in tall buildings
  • Mini pumps for interiors and small pours

The numbers

  • Boom reachUp to about 200 ft vertical or horizontal
  • Pump rateAbout 60 to 150 cu yd per hour
  • SlumpUsually 4 to 6 in for pumping
How we do it

The concrete Pumping and Placement process, step by step

  1. 1

    Pump and truck access planned with set-up spots and traffic control

  2. 2

    Line primed with grout so the mix does not segregate

  3. 3

    Concrete placed in a planned sequence to the pour plan

  4. 4

    Lines flushed and cleaned, washout contained

Where we pour

Concrete Pumping and Placement in your city

Pick your city for the frost depth, ground and pour season that shape the work there.

Open the city page
Or browse every city
Questions

Concrete Pumping and Placement: straight answers

When does a pump make sense?

When trucks cannot reach the work, the pour is big or tall, or labor is better spent finishing than moving concrete with wheelbarrows.

Does pumping change the concrete?

A little: it needs a pumpable mix with enough paste and fines. Plans account for that, and air content is checked at the pump.

How do weather and curing change a pour?

Heat and cold change how fast concrete sets and gains strength. A weather plan sets mix, protection and timing so the slab reaches its strength safely.

Do you do concrete Pumping and Placement in my city?

Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.

Next step

Get a bid for concrete Pumping and Placement

Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.

Get a free bid(800) 290-5816

Free bid

Tell us what you are pouring

Send the city, the kind of concrete work and when you need it. You get a plain written bid with quantities, scope and schedule, and a person answers the phone at (800) 290-5816.

  • The city or address, and the kind of work: a slab, a floor, a dock, a lot, a repair, a coating
  • The rough size and thickness if you know them, and any drawings you can send
  • Your schedule: start date, hours the building is open and anything that cannot be shut down
(800) 290-5816

Get a free bid

We only use your details to answer your request and prepare your bid.