Sidewalks and Walkways for commercial projects
Commercial sidewalks have to be flat, drain well and meet accessibility rules. We form them with smooth transitions, a slip-resistant finish and joints that control cracking.

Typical sidewalks and Walkways jobs
- Public sidewalks and storefront walkways
- Paths between buildings and parking
- Walkways with ramps, landings and handrail sleeves
- Sidewalk replacement after tree-root or utility damage
The numbers
- Thickness4 in, 6 in at driveways and where trucks cross
- Cross slopeNo more than 2 percent for accessible routes
- Joint spacingSame as the width, commonly 4 to 5 ft
The sidewalks and Walkways process, step by step
- 1
Old concrete removed, the base graded and compacted
- 2
Forms set to slope and width, joints planned every few feet
- 3
Concrete placed, screeded, floated and broomed
- 4
Jointed, edged, cured and protected until strong
Sidewalks and Walkways in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Floors, Docks and FlatworkWarehouse and Industrial FloorsFlat, tough floors for forklifts, racks and constant traffic
Floors, Docks and FlatworkDistribution Center FloorsGiant floors placed fast with laser screeds
Floors, Docks and FlatworkCold Storage FloorsFloors that stay solid in freezers and coolers
Floors, Docks and FlatworkPolished ConcreteA hard, glossy floor made from the slab itself
Floors, Docks and FlatworkFloor Grinding and LevelingFlat floors from ones that are not
Floors, Docks and FlatworkLoading Docks and ApronsDock pads that take the beating of trucks and trailersNo service matches that search. Try a shorter word.
Sidewalks and Walkways: straight answers
What slope does a walk need to be accessible?
A walking surface can run up to 5 percent along its length, with a cross slope of 2 percent or less. A steeper route is a ramp and needs rails and landings.
Why do sidewalks crack and lift?
Tree roots, poor base and frost heave. Good compaction, joints and root control reduce it, and slab lifting can repair a settled panel.
How flat does a floor need to be?
It depends on the traffic. Standard retail floors tolerate a little roll, while narrow-aisle forklifts and automated vehicles need very flat, level floors, measured with FF and FL numbers.
Do you do sidewalks and Walkways in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for sidewalks and Walkways
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.