Skip to content
(800) 290-5816
Concrete Lab

Cylinder Break Test

Crush a test cylinder in a compression machine and see the load and strength at any age..

Cylinder Break Test from Commercial Crete
The tool

Use the Cylinder Break Test

KIPS

0.0kips

Strength
0 psi
Design strength
0 psi
Result
Ready

A lab breaks mixes above the specified strength so they pass. Press the button to see this one.

How it works

About the Cylinder Break Test

Choose a mix, an age and a cylinder size, then crush it. The gauge shows the load in kips and the strength in psi, with the result against the design strength.

Why are mixes designed stronger than the specification?

Concrete varies from batch to batch, so the plant aims above the specified strength. ACI 318 sets the margin, about 1,200 psi for mixes from 3,000 to 5,000 psi, so most breaks pass.

How is strength calculated?

The load at failure divided by the area of the cylinder, in pounds per square inch. A 4 by 8 inch cylinder has about 12.6 square inches, and a 6 by 12 inch cylinder about 28.3.

Why break cylinders at 7 and 28 days?

The 7-day break shows the concrete is on track, and 28 days is the standard age for acceptance.

Next step

Want a person to check the numbers?

Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.

Get a free bid(800) 290-5816

Free bid

Tell us what you are pouring

Send the city, the kind of concrete work and when you need it. You get a plain written bid with quantities, scope and schedule, and a person answers the phone at (800) 290-5816.

  • The city or address, and the kind of work: a slab, a floor, a dock, a lot, a repair, a coating
  • The rough size and thickness if you know them, and any drawings you can send
  • Your schedule: start date, hours the building is open and anything that cannot be shut down
(800) 290-5816

Get a free bid

We only use your details to answer your request and prepare your bid.