Skip to content
(800) 290-5816
Floors, Docks and Flatwork

Distribution Center Floors for commercial projects

Distribution centers need acres of flat slab on a tight schedule. We run laser screeds, power trowels and tight quality control so each pour meets flatness numbers and the building opens on time.

Distribution Center Floors work by Commercial Crete
What it covers

Typical distribution Center Floors jobs

  • Cross-dock and fulfillment buildings
  • Food, cold and general distribution floors
  • Truck court and dock-apron slabs
  • Mezzanine and conveyor foundations

The numbers

  • Typical pourStrips of 20 to 30 ft wide for laser screeds
  • Delivery pacingA truck about every 10 to 15 minutes
  • Mix4,000 psi, controlled slump for finishing
How we do it

The distribution Center Floors process, step by step

  1. 1

    Base, grade and moisture checks done before the first truck arrives

  2. 2

    Pour sequence planned by strip so the finishers keep pace with delivery

  3. 3

    Laser screed, float and trowel with edge and joint detail

  4. 4

    Early-entry sawing, curing compound and floor protection

Where we pour

Distribution Center Floors in your city

Pick your city for the frost depth, ground and pour season that shape the work there.

Open the city page
Or browse every city
Questions

Distribution Center Floors: straight answers

How fast can big floors go in?

A good crew with a laser screed can place and finish tens of thousands of square feet a day, if the trucks, pumps and finishers are lined up.

What slows a floor pour down?

Late trucks, poor access and weather. A written delivery plan, a backup pump and a plan for rain keep the pour moving.

Why are there joints in my slab?

Concrete shrinks as it dries, so it cracks. Joints are planned lines where it can crack neatly, and sawing them early keeps cracks out of the middle of the panels.

Do you do distribution Center Floors in my city?

Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.

Next step

Get a bid for distribution Center Floors

Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.

Get a free bid(800) 290-5816

Free bid

Tell us what you are pouring

Send the city, the kind of concrete work and when you need it. You get a plain written bid with quantities, scope and schedule, and a person answers the phone at (800) 290-5816.

  • The city or address, and the kind of work: a slab, a floor, a dock, a lot, a repair, a coating
  • The rough size and thickness if you know them, and any drawings you can send
  • Your schedule: start date, hours the building is open and anything that cannot be shut down
(800) 290-5816

Get a free bid

We only use your details to answer your request and prepare your bid.