Rebar Corrosion Repair for commercial projects
When rebar rusts it swells and cracks the concrete around it. Repairing that means cleaning or replacing the steel, restoring the cover and stopping the corrosion from returning.

Typical rebar Corrosion Repair jobs
- Parking decks, balconies and bridges
- Spalls on columns, beams and slabs
- Chloride-contaminated concrete near the coast or roads
- Marine and industrial structures
The numbers
- Cut-out depthAt least 3/4 in behind the steel
- ProtectionEpoxy-coated bars or galvanic anodes
- Chloride limitAbout 0.2 percent of cement weight at the bar
The rebar Corrosion Repair process, step by step
- 1
Survey with half-cell potential, chloride tests and hammer sounding
- 2
Concrete cut out behind the rebar and steel cleaned to bright metal
- 3
Bars coated or replaced, and anodes or inhibitors installed where needed
- 4
Repair mortar placed, cured and the surface sealed
Rebar Corrosion Repair in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Repair, Coatings and RestorationConcrete RepairBad concrete cut out and rebuilt so it lasts
Repair, Coatings and RestorationCrack Repair and InjectionCracks sealed or bonded back together
Repair, Coatings and RestorationSlab Lifting and LevelingSunken slabs raised back to level in hours
Repair, Coatings and RestorationJoint Sealing and FillingJoints that protect edges and keep water out
Repair, Coatings and RestorationConcrete ResurfacingA fresh surface for worn concrete
Repair, Coatings and RestorationEpoxy Floor CoatingsSeamless, easy-to-clean floors with biteNo service matches that search. Try a shorter word.
Rebar Corrosion Repair: straight answers
What causes rebar to rust?
Salt or carbon dioxide reaching the steel through cracks or thin cover. Once the protective film breaks down, water and air do the rest.
Will anodes stop it?
Galvanic anodes slow corrosion next to repairs, where new cracking often starts, and are a standard part of a good repair.
Can repairs be done while the building stays open?
Usually, in phases and often at night, with dust and noise controlled and barricades set.
Do you do rebar Corrosion Repair in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for rebar Corrosion Repair
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.