Polyaspartic and Urethane Coatings for commercial projects
Polyaspartic and urethane topcoats cure quickly, resist yellowing from sunlight and take abrasion. They shorten the shutdown and keep their color outdoors and by windows.

Typical polyaspartic and Urethane Coatings jobs
- Retail and restaurant floors that cannot close long
- Entrances and sunlit areas where epoxy would yellow
- Loading docks and exterior concrete
- Topcoats over epoxy for UV and abrasion resistance
The numbers
- CureOften foot traffic in 2 to 4 hours
- UVDoes not amber like epoxy
- Working timeShort, so crews apply in small sections
The polyaspartic and Urethane Coatings process, step by step
- 1
Surface prepared and moisture checked
- 2
Base or primer coat applied and, if used, flakes broadcast
- 3
Polyaspartic or urethane topcoat applied quickly in the working time
- 4
Cured for traffic in hours, with full cure in a day or two
Polyaspartic and Urethane Coatings in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Repair, Coatings and RestorationConcrete RepairBad concrete cut out and rebuilt so it lasts
Repair, Coatings and RestorationCrack Repair and InjectionCracks sealed or bonded back together
Repair, Coatings and RestorationSlab Lifting and LevelingSunken slabs raised back to level in hours
Repair, Coatings and RestorationJoint Sealing and FillingJoints that protect edges and keep water out
Repair, Coatings and RestorationConcrete ResurfacingA fresh surface for worn concrete
Repair, Coatings and RestorationEpoxy Floor CoatingsSeamless, easy-to-clean floors with biteNo service matches that search. Try a shorter word.
Polyaspartic and Urethane Coatings: straight answers
Why polyaspartic over epoxy?
It cures in hours instead of days, resists sunlight and cold-weather cures, so the floor is back in use sooner and stays clear.
Does it cost more?
The material costs more per square foot, but a shorter shutdown and a longer life often make up for it.
Can repairs be done while the building stays open?
Usually, in phases and often at night, with dust and noise controlled and barricades set.
Do you do polyaspartic and Urethane Coatings in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for polyaspartic and Urethane Coatings
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.