Stairs and Landings for commercial projects
Concrete stairs and landings are formed, reinforced and finished to the code for risers, treads and handrails. They hold up to weather, salt and heavy foot traffic.

Typical stairs and Landings jobs
- Entry stairs and monumental steps
- Fire stairs and exterior egress stairs
- Landings, platforms and loading steps
- Steps with non-slip nosings or colored finishes
The numbers
- Riser heightUniform, about 4 to 7 in
- Tread depthAt least 11 in
- FinishBroom or abrasive for traction
The stairs and Landings process, step by step
- 1
Stair layout set to code riser and tread dimensions
- 2
Forms and rebar built, handrail sleeves and nosings placed
- 3
Concrete placed from the bottom up and finished with a non-slip texture
- 4
Forms stripped, edges eased and the stairs cured and sealed
Stairs and Landings in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Floors, Docks and FlatworkWarehouse and Industrial FloorsFlat, tough floors for forklifts, racks and constant traffic
Floors, Docks and FlatworkDistribution Center FloorsGiant floors placed fast with laser screeds
Floors, Docks and FlatworkCold Storage FloorsFloors that stay solid in freezers and coolers
Floors, Docks and FlatworkPolished ConcreteA hard, glossy floor made from the slab itself
Floors, Docks and FlatworkFloor Grinding and LevelingFlat floors from ones that are not
Floors, Docks and FlatworkLoading Docks and ApronsDock pads that take the beating of trucks and trailersNo service matches that search. Try a shorter word.
Stairs and Landings: straight answers
Why must all stair risers be the same?
People walk stairs by habit. A riser that is even slightly different causes trips, so codes allow only about 3/8 inch of variation in a run.
Can stairs be added or repaired later?
Yes. Cast-in-place stairs can be added to an existing slab, and worn or spalled steps can be repaired or resurfaced.
Why are there joints in my slab?
Concrete shrinks as it dries, so it cracks. Joints are planned lines where it can crack neatly, and sawing them early keeps cracks out of the middle of the panels.
Do you do stairs and Landings in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for stairs and Landings
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.