Shot Blasting and Surface Prep for commercial projects
A coating is only as good as the surface under it. Shot blasting and grinding remove old coatings, laitance and contamination and leave a clean, rough profile that coatings grip.

Typical shot Blasting and Surface Prep jobs
- Preparing floors for epoxy, polyaspartic and urethane
- Removing traffic markings and old coatings
- Roughening smooth surfaces for overlays
- Cleaning decks and ramps before sealing
The numbers
- ProfileCSP 2 to 5 for most coatings, 3 to 4 typical
- DustVacuum-recovered, no airborne cloud
- OutputThousands of sq ft per hour with a large blaster
The shot Blasting and Surface Prep process, step by step
- 1
Floor inspected and the required profile chosen
- 2
Shot blaster or grinder run in overlapping passes with dust collection
- 3
Edges and corners ground by hand
- 4
Vacuumed, tested for profile and moisture and handed to the next crew
Shot Blasting and Surface Prep in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Repair, Coatings and RestorationConcrete RepairBad concrete cut out and rebuilt so it lasts
Repair, Coatings and RestorationCrack Repair and InjectionCracks sealed or bonded back together
Repair, Coatings and RestorationSlab Lifting and LevelingSunken slabs raised back to level in hours
Repair, Coatings and RestorationJoint Sealing and FillingJoints that protect edges and keep water out
Repair, Coatings and RestorationConcrete ResurfacingA fresh surface for worn concrete
Repair, Coatings and RestorationEpoxy Floor CoatingsSeamless, easy-to-clean floors with biteNo service matches that search. Try a shorter word.
Shot Blasting and Surface Prep: straight answers
What does CSP mean?
Concrete Surface Profile, a scale from 1 to 10 that describes how rough a surface is. Thin coatings need a low number, and thick systems need a rougher profile.
Is shot blasting messy?
A blaster with a dust collector is a closed system. The steel shot is recycled and the dust is vacuumed, so the area stays clean.
Can repairs be done while the building stays open?
Usually, in phases and often at night, with dust and noise controlled and barricades set.
Do you do shot Blasting and Surface Prep in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for shot Blasting and Surface Prep
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.