Rebar Placement for commercial projects
Reinforcing steel gives concrete its tensile strength, but only if it is the right size, in the right place and with the right cover. We place, tie and support the bars to the drawings.

Typical rebar Placement jobs
- Mats, cages, dowels and starter bars
- Slab reinforcing on chairs
- Column, wall and beam cages
- Epoxy-coated, galvanized and stainless bars
The numbers
- Bar sizes#3 to #11 and larger, number is eighths of an inch
- Cover3 in cast against earth, 1.5 to 2 in in forms
- Lap spliceTypically 30 to 50 bar diameters
The rebar Placement process, step by step
- 1
Shop drawings and bar lists checked against the structural plans
- 2
Bars cut, bent and delivered tagged
- 3
Placed, spliced and tied on chairs at the specified spacing and cover
- 4
Inspected by the engineer before the pour
Rebar Placement in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Cutting, Demolition and SpecialtyConcrete DemolitionOld concrete broken out, hauled off and recycled
Cutting, Demolition and SpecialtyConcrete Sawing and CuttingClean straight cuts in slabs, walls and pavement
Cutting, Demolition and SpecialtyCore DrillingRound, clean holes through slabs and walls
Cutting, Demolition and SpecialtyWall Sawing and Slab RemovalOpenings and slabs cut out in controlled pieces
Cutting, Demolition and SpecialtyHydrodemolitionConcrete removed with water, steel left undamaged
Cutting, Demolition and SpecialtyConcrete Pumping and PlacementConcrete delivered exactly where you need itNo service matches that search. Try a shorter word.
Rebar Placement: straight answers
Why does cover matter?
Concrete over the steel protects it from rust. Too little cover lets water and salt reach the bar and the concrete spalls.
What is a chair?
A small support that holds bars at the right height so they end up in the concrete, not on the ground.
How do weather and curing change a pour?
Heat and cold change how fast concrete sets and gains strength. A weather plan sets mix, protection and timing so the slab reaches its strength safely.
Do you do rebar Placement in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for rebar Placement
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.