Crack Repair and Injection for commercial projects
Not every crack is the same. Some need to be sealed to keep water out, and others need to be bonded back together to restore strength. We find the cause first, then pick the material.

Typical crack Repair and Injection jobs
- Epoxy injection of structural cracks
- Polyurethane injection of leaking cracks
- Routing and sealing of moving cracks
- Stitching and carbon-fiber strengthening
The numbers
- EpoxyBonds cracks as thin as about 0.002 in
- PolyurethaneFlexible, seals wet and moving cracks
- PortsSpaced roughly the thickness of the member
The crack Repair and Injection process, step by step
- 1
Crack mapped, measured and monitored to see if it moves
- 2
Surface cleaned and injection ports set along the crack
- 3
Resin injected from the bottom up until it fills
- 4
Ports removed and the surface patched or sealed
Crack Repair and Injection in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Repair, Coatings and RestorationConcrete RepairBad concrete cut out and rebuilt so it lasts
Repair, Coatings and RestorationSlab Lifting and LevelingSunken slabs raised back to level in hours
Repair, Coatings and RestorationJoint Sealing and FillingJoints that protect edges and keep water out
Repair, Coatings and RestorationConcrete ResurfacingA fresh surface for worn concrete
Repair, Coatings and RestorationEpoxy Floor CoatingsSeamless, easy-to-clean floors with bite
Repair, Coatings and RestorationPolyaspartic and Urethane CoatingsFast-curing, UV-stable coatings for busy floorsNo service matches that search. Try a shorter word.
Crack Repair and Injection: straight answers
Epoxy or polyurethane?
Epoxy is rigid and restores strength in dry, stable cracks. Polyurethane stays flexible and seals leaking cracks, even wet ones.
Do cracks always mean a problem?
No. Many are cosmetic shrinkage cracks. Wide, growing or stair-step cracks and cracks with water or rust are worth an engineer's look.
Can repairs be done while the building stays open?
Usually, in phases and often at night, with dust and noise controlled and barricades set.
Do you do crack Repair and Injection in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for crack Repair and Injection
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.