Densifiers and Hardeners for commercial projects
Densifiers soak into the concrete and react to make the top layer harder and less dusty. Dry-shake hardeners are broadcast onto fresh slabs for even more wear resistance.

Typical densifiers and Hardeners jobs
- Dusting or soft warehouse floors
- Retail and showroom floors
- Floors before polishing or sealing
- New slabs that need extra wear resistance
The numbers
- ChemistryLithium, sodium or potassium silicate
- Dry shakeMineral or metallic hardeners broadcast on fresh concrete
- ResultHarder, denser, easier to clean
The densifiers and Hardeners process, step by step
- 1
Surface ground or cleaned to open the pores
- 2
Densifier applied by sprayer and spread with a microfiber mop
- 3
Allowed to react, then rinsed or burnished
- 4
Sealed or polished as specified
Densifiers and Hardeners in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Repair, Coatings and RestorationConcrete RepairBad concrete cut out and rebuilt so it lasts
Repair, Coatings and RestorationCrack Repair and InjectionCracks sealed or bonded back together
Repair, Coatings and RestorationSlab Lifting and LevelingSunken slabs raised back to level in hours
Repair, Coatings and RestorationJoint Sealing and FillingJoints that protect edges and keep water out
Repair, Coatings and RestorationConcrete ResurfacingA fresh surface for worn concrete
Repair, Coatings and RestorationEpoxy Floor CoatingsSeamless, easy-to-clean floors with biteNo service matches that search. Try a shorter word.
Densifiers and Hardeners: straight answers
Does a densifier make a floor waterproof?
No. It hardens and reduces dust, but a guard or sealer is needed for stain and water resistance.
When is a dry-shake hardener a good choice?
For heavy-traffic industrial floors that are new. It is applied in the pour and gives the toughest surface.
Should I repair or replace damaged concrete?
If the concrete is sound underneath, repair is faster and cheaper. If it is thin, heaved or cracked through, replacement is usually the better value. We tell you which, with the reasons.
Do you do densifiers and Hardeners in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for densifiers and Hardeners
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.