Skip to content
(800) 290-5816
Cutting, Demolition and Specialty

Concrete Sawing and Cutting for commercial projects

Diamond saws cut concrete cleanly, in any depth, without the cracks and rough edges of a breaker. We cut openings, joints and trenches to the line.

Concrete Sawing and Cutting work by Commercial Crete
What it covers

Typical concrete Sawing and Cutting jobs

  • Control joints and construction joints
  • Trench and utility cuts in floors
  • Door, window and equipment openings
  • Slab removal along clean lines

The numbers

  • Blade depthFlat saws cut to about 12 to 16 in, wire saws go deeper
  • Joint timingWithin 4 to 12 hours of finishing, depending on temperature
  • SlurryVacuumed, not washed into the drain
How we do it

The concrete Sawing and Cutting process, step by step

  1. 1

    Cut lines laid out and scanned for steel and utilities

  2. 2

    Flat saw or wall saw set to depth with water or dust control

  3. 3

    Slurry collected and removed

  4. 4

    Cut pieces lifted out and the edge cleaned

Where we pour

Concrete Sawing and Cutting in your city

Pick your city for the frost depth, ground and pour season that shape the work there.

Open the city page
Or browse every city
Questions

Concrete Sawing and Cutting: straight answers

Why saw joints soon after a pour?

The slab starts to shrink right away. Sawing within hours puts the crack where you want it, while waiting too long lets random cracks form first.

Is concrete cutting noisy and messy?

Wet saws produce slurry, which we vacuum, and dry cutting with dust collection keeps air clean. Noise is limited to a few hours.

How do weather and curing change a pour?

Heat and cold change how fast concrete sets and gains strength. A weather plan sets mix, protection and timing so the slab reaches its strength safely.

Do you do concrete Sawing and Cutting in my city?

Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.

Next step

Get a bid for concrete Sawing and Cutting

Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.

Get a free bid(800) 290-5816

Free bid

Tell us what you are pouring

Send the city, the kind of concrete work and when you need it. You get a plain written bid with quantities, scope and schedule, and a person answers the phone at (800) 290-5816.

  • The city or address, and the kind of work: a slab, a floor, a dock, a lot, a repair, a coating
  • The rough size and thickness if you know them, and any drawings you can send
  • Your schedule: start date, hours the building is open and anything that cannot be shut down
(800) 290-5816

Get a free bid

We only use your details to answer your request and prepare your bid.