Site Prep and Grading for commercial projects
Concrete is only as good as what is under it. Site prep clears, cuts, fills and compacts the ground to grade, so slabs, paving and foundations sit on a stable, well-drained base.

Typical site Prep and Grading jobs
- Building pads and parking lot subgrades
- Stone base spread and compacted to grade
- Rough and fine grading with laser or GPS control
- Erosion control and stormwater diversion during construction
The numbers
- CompactionTypically 95 percent of standard Proctor
- Base grade toleranceAbout plus or minus 1/2 in under slabs
- Lifts6 to 8 in of loose fill at a time
The site Prep and Grading process, step by step
- 1
Topsoil stripped and stockpiled, unsuitable soil removed
- 2
Fill placed in lifts and compacted, density tested
- 3
Stone base spread and fine-graded to tolerance
- 4
Final grade checked with a laser before the forms or slip-form paver arrive
Site Prep and Grading in your city
Pick your city for the frost depth, ground and pour season that shape the work there.
Or browse every city
Nashville and Davidson County
Williamson and Maury Counties
Rutherford, Wilson and Sumner Counties
Middle and East Tennessee
The Southeast
Northeast and Mid-Atlantic
The Midwest
Texas and Oklahoma
Often ordered with this
Sitework and Site ConcreteExcavation and SubgradeFoundations dug to depth and shaped to plan
Sitework and Site ConcreteStorm Drainage and Catch BasinsInlets and pipes that carry the rain away
Sitework and Site ConcreteTrench DrainsLong drains that pull water off docks, wash bays and entrances
Sitework and Site ConcreteUtility Vaults and ManholesPrecast and cast-in-place structures for the underground
Sitework and Site ConcreteConcrete Barriers and Jersey WallsHeavy barriers that stop vehicles
Sitework and Site ConcreteSound Walls and Screen WallsWalls that hide the dumpsters and block the noiseNo service matches that search. Try a shorter word.
Site Prep and Grading: straight answers
Why is fine grading so important?
A slab that is thick in one place and thin in another cracks. A flat, even base keeps the thickness even and the concrete quantity under control.
What is a proctor test?
A lab test that finds the maximum density a soil can reach at its best moisture. Field density is compared with it to show the soil is compacted enough.
What happens before concrete goes in?
The ground is prepared. Utilities are located, the soil is graded and compacted and drainage is planned, because most concrete problems start in the base.
Do you do site Prep and Grading in my city?
Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.
Get a bid for site Prep and Grading
Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.