Skip to content
(800) 290-5816
Floors, Docks and Flatwork

Loading Docks and Aprons for commercial projects

Dock aprons take the hardest abuse on a site: landing gear, braking and turning trucks. We build thick, doweled, well-drained concrete with the dock hardware cast in correctly.

Loading Docks and Aprons work by Commercial Crete
What it covers

Typical loading Docks and Aprons jobs

  • Truck dock approaches and aprons
  • Dock pits and levelers cast in place
  • Recessed docks and truck wells with walls
  • Trailer drop pads and landing-gear pads

The numbers

  • Thickness8 to 10 in for truck traffic
  • Mix4,500 to 5,000 psi, air-entrained where it freezes
  • Landing padsExtra-thick or reinforced zones under trailer jacks
How we do it

The loading Docks and Aprons process, step by step

  1. 1

    Subgrade replaced or stabilized, base compacted and graded to drain

  2. 2

    Heavy reinforcement and dowels set across joints

  3. 3

    Concrete placed in panels with embedded steel and bumper plates

  4. 4

    Joints sawn and sealed, surface broomed and cured

Where we pour

Loading Docks and Aprons in your city

Pick your city for the frost depth, ground and pour season that shape the work there.

Open the city page
Or browse every city
Questions

Loading Docks and Aprons: straight answers

Why do dock aprons fail?

Thin slabs, weak subgrades and standing water. Landing gear punches a thin pad, and water under the slab pumps out the base.

Can I add a dock to an existing building?

Often, with demolition, a dock pit and a new wall opening, though the design must handle the building structure and drainage.

How flat does a floor need to be?

It depends on the traffic. Standard retail floors tolerate a little roll, while narrow-aisle forklifts and automated vehicles need very flat, level floors, measured with FF and FL numbers.

Do you do loading Docks and Aprons in my city?

Most likely. Commercial Crete serves cities across the country, and every city has its own page. Use the map, pick your city below or call (800) 290-5816 and tell us where the project is.

Next step

Get a bid for loading Docks and Aprons

Tell us about the project: the city, the kind of concrete work and when you need it. You get a plain written bid, and a person answers the phone at (800) 290-5816.

Get a free bid(800) 290-5816

Free bid

Tell us what you are pouring

Send the city, the kind of concrete work and when you need it. You get a plain written bid with quantities, scope and schedule, and a person answers the phone at (800) 290-5816.

  • The city or address, and the kind of work: a slab, a floor, a dock, a lot, a repair, a coating
  • The rough size and thickness if you know them, and any drawings you can send
  • Your schedule: start date, hours the building is open and anything that cannot be shut down
(800) 290-5816

Get a free bid

We only use your details to answer your request and prepare your bid.